Liaoning Diya Capacitor Co.,Ltd -

Liaoning Diya Capacitor Co.,Ltd

Showing 1 - 10 of 11, total 2 pages [First] [Previous] [Next] [Last]

metallized polypropylene film capacitor-axial
Specification: CBB20/MPT/MPA
Detail: The capacitor is non-inductively wound with metallized polypropylene film as the dielectric/electrode with copper-clad steel leads and outer wrapping of polyester sealed with epoxy resin. very low loss at high frequency£¬suita...

polypropylene film capacitor
Specification: CBB13/PPN
Detail: High insulation resistance and excellent moisture resistance because of epoxy resin coating, excellent frequency and temperature characteristics, very small low loss even at high frequency£¬most suitable for high current, larg...

metallized polypropylene film capacitor
Specification: CBB21
Detail: High insulation resistance, good self-healing effect, very small inherent temperature rise, very low loss at high frequency, widely used in DC, pulse, high frequency and high current circuits. Rated voltage: 100/160/200/250/4...

polyester film capacitor
Specification: CL11
Detail: Epoxy resin vacuum-dipped enhances the mechanical strength and humidity resistance, high stability and reliability, high insulation resistance, low dissipation factor, small size, light weight and low cost. Widely used in DC a...

metallized polyester film capacitor-axial
Specification: CL20
Detail: The capacitor is non-inductively wound with metallized polyester film as the dielectric/electrode and copper-clad steel leads and outer wrapping of polyester and sealed with epoxy resin. Wide capacitance range, small size, lon...

metallized polyester film capacitor
Specification: CL21
Detail: The capacitor consists of a coiled polyester film, the medium on which a layer of aluminum is deposited as the plate by means of vacuum evaporation. Epoxy resin coating, the capacitor has electrical performance, long life due ...

metallized polyester film stacked capacitor
Specification: CL21S
Detail: The capacitor is non-inductively wound with metallized polyester film stacked as the dielectric/electrode with copper-clad steel leads and epoxy resin power coating provides the identical outer appearance. High dv/dt ability, ...

box-type metallized polyester film capacitor(stacked version)
Specification: CL71
Detail: Features: These kinds of capacitor apply stacked construction. It is sealed by the flame-retarded epoxy resin. It has good reliable, low loss, good electrical features, uniform dimension and sell-healing effect. It is suitable...

high-voltage & current capacitor
Specification: CBB94
Detail: The capacitor is non-inductively wound with electrode of double-layer metallized polyester film and dielectric of polypropylene wrapped with polyester tape and sealed with epoxy resin. Use tinned copper leads, low inductance, ...

metallized polypropylene film capacitor for ac
Specification: CBB60
Detail: It is small size, light weight and low cost, very small loss, good self-healing effect. Suitable for starting and operation of 50Hz(60H)AC single-phase motor.. Rated voltage: 250/400V Capacitance range:2.4-10uf Voltage proo...


Showing 1 - 10 of 11, total 2 pages [First] [Previous] [Next] [Last]
1 2